Filter
Top Products
DIN Rail High-Voltage Switch Crestron DIN-8SW8
Save
Override
Settings
The state of each output can be saved as an override setting, which can be
automatically recalled when the Override mode is enabled.
NOTE: The control system program has a setting that can prevent
locally saving the override state. If this setting is enabled, the display
shows “Er” when trying to save override states. For more information,
refer to the SIMPL Windows help file.
To save the state of an output as an override setting, press and hold the
OVR button for three seconds. The OVR LED blinks to indicate the new
override setting has been stored.
Reset
To reboot the DIN-8SW8, press the RESET button. The outputs will be
set to the states currently specified by the control system program. If the
control system does not provide any values, the outputs will be set to the
previously set values.
22 • DIN Rail High-Voltage Switch: DIN-8SW8 Operations & Installation Guide – DOC. 6666A