Filter
Top Products
DIN Rail High-Voltage Switch Crestron DIN-8SW8
DIN Rail Installation
The DIN-8SW8 is designed to snap onto a standard DIN rail for
installation in a wall mount enclosure. Wiring connections are made
using screw terminals positioned along the top and bottom, clearly
accessible from the front for easy installation and servicing. All setup
controls and indicators are positioned on the center front panel. When
installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8’s front
panel stays accessible while the connections are concealed.
Cresnet
®
The DIN-8SW8 communicates with a DIN-AP2 2-Series Automation
Processor or other Crestron
®
2-Series control system via the Cresnet
control network. A pair of Cresnet ports is provided on the DIN-8SW8
allowing for easy daisy chaining of several DIN Rail Series automation
control modules.
Override Input
An override input is provided to allow an external contact closure to
momentarily override the control system program and set each channel
output to its override preset state. States can be set and saved locally from
the front panel or remotely via software.
2 • DIN Rail High-Voltage Switch: DIN-8SW8 Operations & Installation Guide – DOC. 6666A