Filter
Top Products
DIN Rail Cresnet
®
Distribution Hub Crestron DIN-HUB
Power can be supplied from a DIN-PWS50 DIN Rail Power Supply or
other Cresnet power supply connected to the NET HOST port. For more
information, refer to the latest version of the DIN-PWS50 Operations &
Installation Guide (Doc. 6667), which is available for download from the
Crestron website (
www.crestron.com/manuals).
NOTE: The DIN-HUB can only be powered by the NET HOST port.
Power cannot be supplied from network devices that are connected to any
of the segments.
Hub segments can be powered internally or from an external power
supply like the DIN-PWS50.
To power a segment internally, install a jumper from the HOST pin to
the EXT pin on the segment’s NET PWR INPUT port as shown in the
following diagram.
Powering a Hub Segment Internally (Segment A Shown)
To power a segment externally, connect the external power supply to the
EXT and G pins on the segment’s NET PWR INPUT port as shown in
the following diagram.
Powering a Hub Segment Externally (Segment A Shown)
DIN-PWS50 or OTHER
CRESTRON 24 VDC
SUPPLY
24 G
12 • DIN Rail Cresnet Hub: DIN-HUB Operations & Installation Guide – DOC. 6671A