Cypress CY7C1353G Computer Monitor User Manual


 
CY7C1353G
Document #: 38-05515 Rev. *E Page 12 of 13
© Cypress Semiconductor Corporation, 2004-2007. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for
the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended
to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize
its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
ZBT is a trademark of Integrated Device Technology, Inc. NoBL and No Bus Latency are trademarks of Cypress Semiconductor.
All product and company names mentioned in this document are the trademarks of their respective holders.
Ordering Information
Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or
visit www.cypress.com for actual products offered.
Speed
(MHz) Ordering Code
Package
Diagram Part and Package Type
Operating
Range
133 CY7C1353G-133AXC 51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Pb-Free Commercial
CY7C1353G-133AXI lndustrial
100 CY7C1353G-100AXC 51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Pb-Free Commercial
CY7C1353G-100AXI lndustrial
Package Diagrams
NOTE:
1.JEDECSTDREFMS-026
2.BODYLENGTHDIMENSIONDOESNOTINCLUDEMOLDPROTRUSION/ENDFLASH
MOLDPROTRUSION/ENDFLASHSHALLNOTEXCEED0.0098in(0.25mm)PERSIDE
3.DIMENSIONSINMILLIMETERS
BODYLENGTHDIMENSIONSAREMAXPLASTICBODYSIZEINCLUDINGMOLDMISMATCH
0.30±0.08
0.65
20.00±0.10
22.00±0.20
1.40±0.05
12°±1°
1.60MAX.
0.05MIN.
0.60±0.15
0° MIN.
0.25
0°-7°
(8X)
STAND-OFF
R0.08MIN.
TYP.
0.20MAX.
0.15MAX.
0.20MAX.
R0.08MIN.
0.20MAX.
14.00±0.10
16.00±0.20
0.10
SEEDETAIL
A
DETAIL
A
1
100
30
31 50
51
80
81
GAUGEPLANE
1.00REF.
0.20MIN.
SEATINGPLANE
100-Pin TQFP (14 x 20 x 1.4 mm) (51-85050)
51-85050-*B
[+] Feedback