Cypress CY7C63513C Computer Hardware User Manual


 
CY7C63413C
CY7C63513C
CY7C63613C
Document #: 38-08027 Rev. *B Page 25 of 32
Absolute Maximum Ratings
Storage Temperature ..........................................................................................................................................–65°C to +150°C
Ambient Temperature with Power Applied...............................................................................................................–0°C to +70°C
Supply Voltage on V
CC
relative to V
SS
....................................................................................................................–0.5V to +7.0V
DC Input Voltage........................................................................................................................................... –0.5V to +V
CC
+0.5V
DC Voltage Applied to Outputs in High Z State............................................................................................ –0.5V to + V
CC
+0.5V
Max. Output Current into Port 0,1,2,3 and DAC[1:0] Pins ................................................................................................... 60 mA
Max. Output Current into DAC[7:2] Pins............................................................................................................................. 10 mA
Power Dissipation ............................................................................................................................................................. 300 mW
Static Discharge Voltage ...............................................................................................................................................> 2000V
[3]
Latch-up Current ........................................................................................................................................................... > 200 mA
DC Characteristics Fosc = 6 MHz; Operating Temperature = 0 to 70°C
Parameter Min. Max. Unit Conditions
General
V
CC (1)
Operating Voltage 4.0 5.5 V Non USB activity (note 4)
V
CC (2)
Operating Voltage 4.35 5.25 V USB activity (note 5)
I
CC1
V
CC
Operating Supply Current 40 mA V
CC
= 5.5V
I
CC2
V
CC
= 4.35V 15 mA
I
SB1
Supply Current - Suspend Mode 30 µA Oscillator off, D– > Voh min
V
PP
Programming Voltage (disabled) –0.4 0.4 V
T
start
Resonator Start-up Interval 256 µsV
CC
= 5.0V, ceramic resonator
t
int1
Internal Timer #1 Interrupt Period 128 128 µs
t
int2
Internal Timer #2 Interrupt Period 1.024 1.024 ms
t
watch
Watch Dog Timer Period 8.192 14.33 ms
I
il
Input Leakage Current 1 µA Any pin
I
sm
Max I
SS
IO Sink Current 60 mA Cumulative across all ports (note 6)
Power-On Reset
t
vccs
V
CC
Reset Slew 0.001 200 ms Linear ramp: 0 to 4.35V (notes 7,8)
USB Interface
V
oh
Static Output HIGH 2.8 3.6 V 15k ± 5% ohms to Gnd (note 5)
V
ol
Static Output LOW 0.3 V
V
di
Differential Input Sensitivity 0.2 V |(D+)–(D–)|
V
cm
Differential Input Common Mode Range 0.8 2.5 V 9-1
V
se
Single-Ended Receiver Threshold 0.8 2.0 V
C
in
Transceiver Capacitance 20 pF
I
lo
Hi-Z State Data Line Leakage –10 10 µA0 V < V
in
<3.3 V
R
pu
Bus Pull-up Resistance (V
CC
option) 7.35K 7.65 k 7.5 k ± 2% to V
CC
R
pu
Bus Pull-up Resistance (Ext. 3.3V option) 1.425 1.575 k 1.5 k ± 5% to 3.0–3.6V
R
pd
Bus Pull-down Resistance 14.25 15.75 k 15 k± 5%
General Purpose I/O Interface
R
up
Pull-up Resistance 4.9K 9.1K Ohms
V
ith
Input Threshold Voltage 45% 65% V
CC
All ports, LOW to HIGH edge
Notes:
3. Qualified with JEDEC EIA/JESD22-A114-B test method.
4. Functionality is guaranteed of the V
CC (1)
range, except USB transmitter and DACs.
5. USB transmitter functionality is guaranteed over the V
CC (2)
range, as well as DAC outputs.
6. Total current cumulative across all Port pins flowing to V
SS
is limited to minimize Ground-Drop noise effects.
7. Port 3 bit 7 controls whether the parts goes into suspend after a POR event or waits 128 ms to begin running.
8. POR will re-occur whenever V
CC
drops to approximately 2.5V.
[+] Feedback