Dell 1090 Laptop User Manual


  Open as PDF
of 46
 
Back to Contents Page
Coin-Cell Battery
Dell™Inspiron™1090ServiceManual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the instructions in Before You Begin.
2. Remove the label door (see Removing the Label Door).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
5. Remove the battery (see Removing the Battery).
6. Remove the memory module (see Removing the Memory Module).
7. Use a plastic scribe and gently pry the coin-cell out of the battery socket on the system board.
8. Lift the coin-cell battery out of the system board socket.
Replacing the Coin-Cell Battery
1. Follow the instructions in Before You Begin.
2. With the positive side up, snap the coin-cell battery into the battery socket on the system board.
3. Replace the memory module (see Replacing the Memory Module).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
plastic scribe
2
coin-cell battery
 previous next