Filter
Top Products
1. Follow the instructions in Before You Begin.
2. Clean the thermal grease from the bottom of the processor fan and heat-sink assembly and reapply it.
3. Align the three captive screws on the processor fan and heat-sink assembly with the screw holes on the system board and tighten the screws in
sequential order (indicated on the processor heat-sink).
4. Connect the processor fan and heat-sink assembly cable to the connector on the system board.
5. Replace the memory module (see Replacing the Memory Module).
6. Replace the battery (see Replacing the Battery).
7. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
8. Replace the keyboard (see Replacing the Keyboard).
9. Replace the label door (see Replacing the Label Door).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.