Dell 1090 Laptop User Manual


 
11. Gently peel off the display cable from the display panel.
Replacing the Display Cable
1. Follow the instructions in Before You Begin.
2. Slide the tabs on the display-panel hinges into the slots on the display panel and place the hinges in position.
3. Connect the display cable and touch-screen cable to the connectors on the display panel.
4. Turn the display panel over.
5. Replace the display panel (see Replacing the Display Panel).
6. Replace the display hinges (see Replacing the Display Hinges).
7. Replace the display bezel (see Replacing the Display Bezel).
8. Replace the hinge caps (see Replacing the Hinge Caps).
9. Replace the display assembly (Replacing the Display Assembly).
Back to Contents Page
1
display-panel hinges (2)
2
pull-tab
3
display cable
4
touch-screen cable connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.