Filter
Top Products
14. Remove the two screws (one on each side) that secure the display assembly to the computer base.
15. Lift the display assembly off the computer.
Replacing the Display Assembly
1. Follow the procedures in Before You Begin.
2. Place the display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
3. Route the Mini-Card antenna cables through the routing guides.
4. Connect the antenna cables to the WWAN card, if applicable (see Replacing the WWAN Card).
5. Connect the antenna cables to the WLAN card, if applicable (see Replacing the WLAN Card).
1
camera cable connector
2
display cable connector
3
Mini-Card antenna cables
1
display assembly
2
screws (2)