Filter
Top Products
before installing any cards.
3. Align the cutout on the bottom of the card with the crossbar in the system board connector. Gently rock the card into
the connector until it is fully seated.
Ensure that the card is fully seated and that its bracket is within the card slot.
4. Secure the card bracket with the screw you removed in step 2.
5. Connect any cables that should be attached to the card.
For information about the card's cable connections, see the documentation for the card.
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can cause damage to the
equipment.
6. If you installed a sound card:
a. Enter system setup
, select Audio Controller, and then change the setting to Off.
b. Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the