Back to Contents Page
Access Panel
Dell™Vostro™1220ServiceManual
Removing the Access Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. During installation or removal of ANY hardware, always ensure that all data is backed up properly.
3. Remove the battery from the computer.
4. Loosen the two captive screws securing the access panel.
5. Remove the access panel.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.