Filter
Top Products
Back to Contents Page
I/O Panel
Dell™Vostro™1220ServiceManual
Removing the I/O Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery, hinge cover, keyboard, optical drive, LCD assembly, and palm rest from the system.
4. Disconnect the I/O panel cable.
5. Remove the screw securing the I/O panel board.
6. Remove the I/O panel board from the system.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.