Filter
Top Products
Back to Contents Page
Palm Rest
Dell™Vostro™1220ServiceManual
Removing Palm Rest
1. Follow the procedures in Before Working Inside Your Computer.
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery, hinge cover, keyboard, optical drive, and LCD assembly from the system.
4. Remove the nine screws that secure the palm rest to the bottom of the computer.
5. Turn the computer over.
6. Remove the three screws that secure the palm rest to the top of the computer.
7. Disconnect the palm rest cable from the system board.
8. Disconnect the palm rest cable from the system board.
9. Carefully remove the palm rest from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.