Dell 124T LTO-3 Network Hardware User Manual


 
Back to Contents Page
Introduction:Dell™PowerVault™124TLTO-3 Autoloader User's Guide
Overview
Data backup is essential to protect irreplaceable information. Backing up data to magnetic tape is an easy, cost-efficient method used by many small and
medium businesses. However, most enterprises have so much data that a single backup tape is not enough; the information has to be spread across
numerous tapes. To avoid constantly changing tapes manually, many tape backup solutions include a PowerVault 124T LTO-3 autoloader.
Each autoloader is a device that includes a robot, a tape drive and one or two magazines for tape cartridges. The user's application can automatically load and
unload tape cartridges as required for data backup or data retrieval. Dell PowerVault 124T LTO-3 autoloaders provide a compact, high capacity, but low cost
method for easy, unattended data backup.
The PowerVault 124T LTO-3 contains an IBM LTO-3 tape drive, and one or two magazines that can hold up to eight cartridges each. The user can insert a
single cartridge directly through a media door (mailslot) that can be password protected. From the media door (mailslot), the user can insert the cartridge into
the tape drive provided there is no cartridge already in the drive, or into a magazine slot provided there is no cartridge already in the slot.
The front panel on the autoloader includes a liquid crystal display (LCD) screen and four function keys. A scrolling menu on the LCD screen allows the user to
obtain information from the autoloader and enter commands. The front panel also includes two light emitting diodes (LEDs) indicating the autoloader's ready
status and error status.
The PowerVault 124T LTO-3 connects to the user's host server through a Small Computer System Interface (SCSI) connection allowing the host to send data
and commands automatically. The unit also can connect to an Ethernet which allows the user to perform administrative functions and download system
updates.
The autoloader is SCSI-3 compatible and operates as a single SCSI ID/two LUN data storage device and provides a compressed capacity of 1.24 Terabytes
and a sustained data transfer rate of 245 GB per hour (native) or as high as 490 GB per hour compressed (assuming 2:1 compression)
The autoloader is compatible with the most popular operating systems and environments supporting an Ultra 160 SCSI or an Ultra 320 SCSI LVD interface but
requires direct support from the operating system or a compatible backup application to take full advantage of its many features.
Back to Contents Page