Dell 1555 Laptop User Manual


  Open as PDF
of 49
 
Back to Contents Page
ExpressCard Board
DellStudio™1555ServiceManual
Removing the ExpressCard Board
Replacing the ExpressCard Board
Removing the ExpressCard Board
1. Follow the procedures in Before You Begin.
2. Remove the palm rest (see Removing the Palm Rest).
3. Disconnect the ExpressCard cables from the connectors on the system board.
4. Remove the four screws securing the ExpressCard board to the computer base cover and remove the board.
Replacing the ExpressCard Board
1. Connect the ExpressCard board cables to the system board connectors.
2. Place the ExpressCard board in position and replace the four screws to secure the board.
3. Replace the palm rest (see Replacing the Palm Rest).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as the back panel) on the computer.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working
inside the computer.
1
ExpressCard board
2
screws (4)
3
ExpressCard cables
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 previous next