Filter
Top Products
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
Processor L2 Cache
Displays the processor L2 cache size.
Memory Installed
Indicates the amount of installed memory in MB.
Memory Available
Indicates the amount of memory available in MB.
Memory Speed
Indicates the memory speed in MHz.
Standard CMOS Features
System Time
Displays current time in hh:mm:ss format.
System Date
Displays the current date in mm:dd:yy format.
AHCI Port0
Auto detects IDE devices in port 0.
AHCI Port1
Auto detects IDE devices in port 1.
Advanced BIOS Features
CPU Feature
Describes type of processor.
USB Device Setting
Enable or disable the USB controller /Set the operational USB speed.
Advanced Chipset Features
Onboard Audio Controller
Allows you to enable or disable the audio controller.
SATA Mode select
Allows you to switch between AHCI and IDE.
Onboard LAN Controller
Allows you to enable or disable onboard Broadcom network controller.
Onboard LAN Boot ROM
Allows you to enable or disable ROM for Broadcom PCI E Network Controller.
Boot Device Configuration
Boot Settings Configuration
Enable or disable fast boot and Numlock key.
Hard Disk Boot Priority
Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected.
1st Boot Device
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (Removable by default).
2nd Boot Device
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default).
3rd Boot Device
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default).
Boot Other Device
Allows you to boot through any other device.
Power Management Features
ACPI Suspend Type
Specifies the suspend type. The default is S3.
C1E Support
This option allows you to enable or disable the "Enhanced Halt State".
Remote Wake Up
This option turns on the computer when a user tries to access the computer through the LAN. The default is Enabled.
AC Recovery
Auto Power On
Enables you to set an alarm to turn on the computer automatically. The default is Disabled.
BIOS Security Features
Supervisor Password
Status of supervisor password installed.
User Password
Status of user password installed.
Set Supervisor Password
Allows to set the desired supervisor password.
Exit
Exit Options
Provides options to Load Optimal Default, Save and Exit Setup, and Exit Without Saving.