Dell 220S Laptop User Manual


 
Back to Contents Page
Type of
Card
Installed
Removed
Sound
Card
1. Enter the system setup program (see System Setup Program for
instructions).
2. Go to Integrated Peripherals, select Onboard Audio Controller, and
then change the setting to Disabled.
3. Connect the external audio devices to the sound card's connectors.
1. Enter the system setup program (see System Setup
Program for instructions).
2. Go to Integrated Peripherals, select Onboard Audio
Controller, and then change the setting to Enabled.
3. Connect the external audio devices to the computer's
back panel connectors.
Network
Card
1. Enter the system setup program (see System Setup Program for
instructions).
2. Go to Integrated Peripherals, select Onboard LAN Controller, and then
change the setting to Disabled, if you prefer not to use both interfaces.
3. Connect the network cable to the network card's connector.
1. Enter the system setup program (see System Setup
Program for instructions).
2. Go to Integrated Peripherals, select Onboard LAN
Controller, and then change the setting to Enabled.
3. Connect the network cable to the network connector
on the system board.