Dell 220S Laptop User Manual


 
Back to Contents Page
Bezel
Dell™Vostro™420/220/220sServiceManual
Removing the Bezel
Replacing the Bezel
Removing the Bezel
1. Follow the procedures in Before Working on Your Computer.
2. Remove the computer cover (see Removing the Computer Cover).
3. With the computer still on its side, gently lift the clips slightly upward to release that edge of the bezel from the chassis.
4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
Replacing the Bezel
1. With the computer still on its side, align and insert the bezel hooks into the slots along one edge of the front of the computer.
2. Rotate the bezel toward the computer until the clips snap into place on the opposite edge of the front of the computer
.
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE: The procedure for removing and replacing the bezel is identical for the Vostro 420, Vostro 220, and Vostro 220s computers; the illustrations
provided are for example only and may not represent your particular computer precisely.
1
clips (4)
2
bezel