Filter
Top Products
4-4 Dell PowerVault 720N, 740N, and 760N Users Guide
5HVXOWV
After you finish configuring the filer, it is on-line. The following directories exist on the
filer:
/vol/vol0
/vol/vol0/home
NOTE: /vol
is not a directoryit is a special virtual root path under which the filer
mounts its volumes. You cannot mount /vol
to view all the volumes on the filer; you
must mount each filer volume separately.
If you purchased a license for the NFS protocol,
/vol/vol0
is exported to the administra-
tion host for root access;
/vol0/home
is exported to the administration host for root
access and to all clients for general access.
If you purchased a license for the CIFS protocol,
/vol/vol0
is shared as C$; only the
system administrator with the root password has read and write access to the C$
share. The
/vol/vol0/home
directory is shared as HOME without access granted to
anyone.
9HULI\LQJ1HWZRUN&RQQHFWLRQV
8VLQJWKHSLQJ&RPPDQG
After you configure the filer, you use the
ping
command from a client attached to the
network to verify that the filer can communicate with other computers on the
network.
3URFHGXUH
To verify filer communication, perform the following steps:
1. At a client attached to the network, enter the following command:
ping hostname-interface
Replace the variable
hostname
with the host name that you assigned to the filer
when you ran
setup
; replace the variable
interface
with one of the interface
names that the filer assigned when you ran
setup
.
2. Repeat the test once for each interface that is installed in the filer.
([DPSOHV
The following examples test the network connections for a filer that has the host
name
filer
with two interfaces named
e0
and
f0
installed:
ping filer-e0
ping filer-f0