Filter
Top Products
14 Setup and Quick Reference Guide
www.dell.com | support.dell.com
Attaching the Stand
NOTE: If you are
installing the computer
under a desktop or
tabletop, first attach all
cables, and then attach
the stand to the mounting
plate (see "Attaching the
Stand to the Mounting
Plate" on page 18).
1
Raise the captive screw and slide the chassis stand slat into one of
three mounting slots on the back of the computer.
2 When the stand is in place, tighten the screw.
NOTICE: If your computer is oriented under a desktop or tabletop and is in a
high-vibration environment, use the optional wall-mount bracket instead of the
computer stand.
Connecting the AC Adapter
NOTE: The power
adapter LED will light
when the adapter is
properly plugged into a
wall outlet and into the
computer.
1
Connect the power adapter to the connector on the back of the
computer.
2 Connect the power cable to the power adapter.
NOTICE: The following steps apply to Japan only.
3
4
3U083ebk1.book Page 14 Thursday, February 6, 2003 1:38 PM