Filter
Top Products
Setup and Quick Reference Guide 19
NOTE: Before attaching
the mounting plate to a
surface, first orient
yourself with how the
stand will attach to the
mounting plate.
1
Using the four #6 wood screws (0.625 inch; 15.88 mm) provided,
attach the mounting plate to a solid surface with a minimum thickness
of 1 inch (2.5 cm).
2 Orient the computer and stand under the mounting plate
approximately 1 inch (2.5 cm) from the edge of the mounting plate.
NOTICE: Make sure that you snap the release-lever tab securely into the
mounting-plate slot.
screw holes (4)
mounting-plate slot
release-lever tab
solid surface with a
1-inch (2.5 cm)
minimum thickness
3U083ebk1.book Page 19 Thursday, February 6, 2003 1:38 PM