Filter
Top Products
33 Installation
NOTE: If you changed the default HTTP/HTTPS ports in the serial console and are
using an IPv4 address, use this IP address format: "https://<ipaddress>:<port#>",
where "port#" is the number you changed the port number to in the serial console. If
you are using an IPv6 address, use this format: "https://[<ipaddress>]:<port#>",
where "port#" is the number you changed the port number to in the serial console. If
you are using an IPv6 address, you must enclose the address in square brackets.
2
The login window opens. Type your username and password and click
OK
.
3
The on-board web interface opens and displays the
Connections
tab.
NOTE: The Remote Console Switch will attempt to detect if Java is already installed
on your PC. If it is not, in order to use the on-board web interface, you will need to
install it. You may also need to associate the JNLP file with Java WebStart.
NOTE: Using the on-board web interface requires using Java Runtime Environment
(JRE) version 1.6.0_2 or higher.
NOTE: Once you have logged in to the on-board web interface, you will not have to
log in again when launching new sessions unless you have logged out or your
session has exceed the inactivity timeout specified by the administrator.
Remote Console Switch Software Installation
and Setup
Before installing your Dell Remote Console Switch Software, refer to the
following lists to ensure that you have all the items that shipped with your
software as well as all other items necessary for proper installation.
Supplied with the Remote Console Switch Software
Your Dell Remote Console Switch package contains the following items:
• Dell Remote Console Switch System User’s Guide and Remote
Console Switch Software CD
• Download Instructions
• Safety Booklet
Supported Operating Systems
The Remote Console Switch Software is supported on the following
operating systems: