Filter
Top Products
5. Flip the computer and remove the screws that secure the palmrest assembly to the base of the computer and flip
open the lower assembly.
6. Press against the sections to release the palmrest assembly and remove it from the computer.
Installing the Palmrest Assembly
1. Align the palmrest assembly to its original position in the computer until it snaps into place.
2. Tighten the screws to secure the palmrest assembly to the computer..
3. Flip the computer and tighten the screws to secure the palmrest assembly to the computer.
4. Tighten the screws to secure the palmrest assembly to the base of the computer.
5. Connect the following cable:
a) Speaker cable
b) fingerprint-scanner cable
c) touchpad cable
21