Installing the System Board
1. Place the system board on the chassis.
2. Tighten the screws to secure the system board to the computer.
3. Place the power-connector bracket on the system board. Tighten the screws to secure the power-connector
bracket to the computer.
4. Connect the following cables to the system board:
a) coin-cell battery
b) hall-sensor cable
c) smart-card cable
5. Install:
a) display assembly
b) sniffer board
c) palmrest assembly
d) keyboard
e) base cover
f) SD card
g) battery
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the Thermal Module
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
39