Filter
Top Products
Option Description
Unobtrusive Mode This feature, when enabled, pressing Fn+B allows you to turn on/off all light and
sound emissions including system fan and wireless radios in the system. This
option is disabled by default.
• Enable Unobtrusive Mode
Miscellaneous Devices Allows you to enable or disable the following devices:
• Enable Microphone
• Enable Camera
• Enable eSATA Ports
• Enable Media Card
• Disable Media Card
NOTE: All devices are enabled by default.
You can also enable or disable Media Card.
Video
Table 4. Video
Option Description
LCD Brightness Allows you to set the display brightness depending up on the power source (On
Battery and On AC).
NOTE: The Video setting will only be visible when a video card is installed into the system.
Dynamic Backlight Control Allows you to enable/disable Dynamic backlight control.
Security
Table 5. Security
Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard
drive password. Deleting the admin password automatically deletes the
system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
System Password Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Internal HDD-0 Password Allows you to set or change the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
45