Filter
Top Products
Removing the Sniffer Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) SD card
c) base cover
d) keyboard
e) palmrest assembly
3. Disconnect the sniffer-board cable and remove the screw that secures the sniffer board to the computer and
remove it.
Installing the Sniffer Board
1. Place the sniffer board in its slot on the computer.
2. Tighten the screw that secures the sniffer board to the computer.
3. Connect the sniffer-board cable.
4. Remove:
a) palmrest assembly
b) keyboard
c) base cover
d) SD card
e) battery
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) SD card
c) base cover
d) keyboard
e) palmrest assembly
3. Disconnect the LVDS and camera cable from the system board.
34