Filter
Top Products
Removing the Smart-Card Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) SD card
c) base cover
d) keyboard
e) palmrest assembly
3. Disconnect the smart-card cables from the computer.
4. Remove the screws that secure the smart-card board in its place. Remove the smart-card cable from the routing
channel and remove the smart-card from the computer.
Installing the Smart-Card Board
1. Route the smart-card cable and place the smart-card board in its slot in the computer.
2. Tighten the screws to secure the smart-card board to the computer.
3. Connect the smart-card cables to the computer.
4. Install:
a) palmrest assembly
b) keyboard
c) base cover
d) SD card
e) battery
31