Filter
Top Products
Memory Module(s) 21
Memory Module(s)
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Memory Module(s)
Prerequisites
Remove the computer cover. See "Removing the Computer Cover" on
page 18.
Procedure
WARNING: The memory module(s) may become very hot during normal operation.
Allow the memory module(s) to cool before touching them.
1
Locate the memory-module connector on the system board.
See "System Board Components" on page 14.
2
Press out the securing clip at each end of the memory-module connector.
3
Grasp the memory module and pull it upwards.
If the memory module is difficult to remove, gently ease the
memory module back and forth to remove it from the connector.
1 memory module connector 2 securing clips (2)
1
2
book.book Page 21 Tuesday, April 17, 2012 11:37 AM