Filter
Top Products
System Setup 97
USB Boot Support Allows you to enable or disable booting from USB
mass storage devices such as hard drive, optical
drive, USB key, and so on.
Enabled or Disabled (Disabled by default)
Boot Mode Specifies the boot sequence from the
available devices
1st Boot Displays the first boot device
2nd Boot
Displays the second boot device
3rd Boot
Displays the third boot device
4th Boot
Displays the fourth boot device
5th Boot
Displays the fifth boot device
Power
Wake Up by Integrated
LAN/WLAN
Allow the computer to be powered on by
special LAN or wireless LAN signals
Enabled or Disabled (Disabled by default)
AC Recovery Allows you to configure the behavior of your
computer after it recovers from a power failure
Power Off, Power On, or Last Power State
(Power Off by default)
Auto Power On Allows you to enable or disable the computer from
turning on automatically
Enabled or Disabled (Disabled by default)
Auto Power On Mode Allows you to set the computer to turn on
automatically every day or on a preselected date;
This option can be configured only if the Auto
Power On mode is set to Enabled
Everyday or Selected Day (Selected Day by default)
Boot (continued)
book.book Page 97 Tuesday, April 17, 2012 11:37 AM