Filter
Top Products
a. VESA stand
b. back cover
c. VESA mount bracket
d. system-board shield
3. Remove the screws that secure the heatsink module to the chassis. Lift the heatsink assembly up and
remove it from the computer.
Installing the Heatsink Assembly
1. Align and place the heatsink assembly on the computer.
2. Tighten the screws that secure the heatsink assembly to the chassis.
3. Install:
a. system-board shield
b. VESA mount bracket
c. back cover
d. VESA stand
4. Follow the procedures in After Working Inside Your Computer.
Removing the Processor Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. VESA stand
b. back cover
c. VESA mount bracket
d. system-board shield
3. Perform the following steps as shown in the illustration:
a. Disconnect the power-supply cable from the connector on the system board [1][2].
b. Unthread the cable from the hooks in the computer [3].
23