Filter
Top Products
Installing the Display Panel
1. Tighten the screws to secure the display bracket to the display panel.
2. Place the display panel on the chassis.
3. Tighten the screw to secure the WEB GND cable to the chassis.
4. Fix the tape on both sides of the display panel..
5. Align all the cables through their tabs on the display panel.
6. Tighten the screws to secure the latches to the computer.
7. Install:
a. system board
b. antenna module
c. speakers
d. speaker cover
e. processor fan
f. heatsink assembly
g. power supply unit
h. power-supply fan
i. converter board
j. power and OSD buttons board
k. intrusion switch
l. hard drive
m. optical drive
n. WLAN card
o. input/output (I/O) board shield
p. system-board shield
q. VESA mount bracket
r. back cover
s. VESA stand
8. Follow the procedures in After Working Inside Your Computer.
37