Filter
Top Products
7. Follow the procedures in After Working Inside Your Computer.
Removing the Power Supply Unit (PSU)
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. VESA stand
b. back cover
c. VESA mount bracket
d. system-board shield
e. input/output (I/O) board shield
f. power-supply fan
3. Disconnect the power-supply cable from the connector on the system board.
4. Perform the following steps as shown in the illustration:
a. Unthread the cable from the hooks in the computer [1].
b. Remove the screws that secure the power-supply unit to the chassis [2].
c. Slide upwards to release the power-supply unit from the chassis [3].
d. Lift the power-supply unit up and remove it from the computer [4].
28