Filter
Top Products
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. VESA stand
b. back cover
c. VESA mount bracket
d. system-board shield
e. input/output (I/O) board shield
f. WLAN card
g. optical drive
h. hard drive
i. intrusion switch
j. power and OSD buttons board
k. converter board
l. processor fan
m. power supply unit
n. heatsink assembly
o. power-supply fan
p. system board
q. display panel
3. Lift the latch and release the camera from its slot to access the camera cable. Disconnect the camera
cable from the camera and remove the camera from the computer.
Installing the Camera
1. Align the camera into its slot.
2. Connect the camera cable and fix the latch.
3. Install:
38