Filter
Top Products
7. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.
8. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
Display Latch
1
display-panel ground wire
2
M2 x 3-mm ground screw
3
M2 x 3-mm screws (8)
4
display panel
1
pull-tab on bottom flex-cable connector
2
top flex-cable connector
3
display connector
4
inverter connector
CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.