Filter
Top Products
Back to Contents Page
Video Card
Dell™Inspiron™XPSandInspiron9100ServiceManual
If you ordered a video card with your computer, it is already installed. To remove and replace a video card:
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the left, right, and center hinge covers.
3. Remove the keyboard.
4. Remove the display assembly.
5. Remove the keyboard bracket.
6. Remove the four M2.5 x 6-mm screws from the video card.
7. Gently pull up the video card to remove it.
The video card heat sink is part of the video card assembly.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1
system board connector
2
M2.5 x 6-mm screws (4)
3
video card