Dell 9100 Laptop User Manual


 
Back to Contents Page
Bluetooth™Card
Dell™Inspiron™XPSandInspiron9100ServiceManual
If you ordered a Bluetooth card with your computer, the card is already installed.
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the battery.
3. Open the Bluetooth card door.
4. Using a plastic scribe or screwdriver, gently pry the Bluetooth card from the plastic guide bracket and the compartment so that you can disconnect the
Bluetooth card from its cable and remove it from the computer.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1
Bluetooth card
2
Bluetooth card connector
3
Bluetooth card door