Filter
Top Products
1 display panel connector
2 top flex cable connector
3 pull-tab
4 bottom flex cable connector
5 inverter connector
9. Remove the tape that secures the display panel connector and the tape that secures the middle of the display-feed flex
cable to the display panel.
10. Pull the top flex cable connector down and away to remove it from the display panel connector.
Replacing the Display Panel
1. Reconnect the top flex cable connector to the display panel connector.
2. Reconnect the bottom flex cable connector to the inverter connector.
3. Replace the tape that secures the display panel connector and the tape that secures the middle of the display-feed flex
cable to the display panel.
4. Place the bottom edge of the display panel in the bottom of the top cover and lift the top of the panel with your hand.
5. Lay the display panel in the top cover.
6. Reinstall the five M2 x 4-mm screws that secure the display panel to the top cover.
Display Latch