Filter
Top Products
Installing System Components 189
System Board
The following table lists the different types of system boards, including model
numbers, supported in the sled.
NOTE: For information about identifying the sled’s system board model number,
see "Identifying System Board Model Number" on page 209.
Removing the System Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1
Remove the sled from the enclosure. See "Removing a Sled" on page 133.
2
Remove the front cover. See "Removing the Front Cover" on page 138.
3
Remove the back cover. See "Removing the Back Cover" on page 140.
4
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 141.
5
Remove the heat sink. See "Removing a Heat Sink" on page 143.
6
Remove the processor. See "Removing a Processor" on page 147.
7
Remove the memory modules. See "Removing Memory Modules" on
page 153.
8
If installed, remove the RAID controller card. See "Removing the RAID
Controller Card" on page 157.
9
If installed, remove the RAID battery. See "Removing the RAID Battery"
on page 159.
System Board System Board Model Number
V1.0 CN0W6W6G (for sled with Intel Xeon E5-2600 series processor)
V1.1 CN0TND55 (for sled with Intel Xeon E5-2600 series processor)
V1.2 CN09N44V (for sled with Intel Xeon E5-2600V2 series processor)