Filter
Top Products
Troubleshooting 209
17
Turn off the sled and attached peripherals.
18
Remove the sled from the enclosure. See "Removing a Sled" on page 133.
19
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 141.
20
Replace processor 1 with processor 2. See "Installing a Processor" on
page 148.
21
Repeat step 13 through step 16.
If you have tested both the processors and the problem persists, the system
board is faulty. See "Getting Help" on page 229.
Identifying System Board Model Number
1
Press <F2> immediately after a power-on or reboot to enter System
Setup.
2
In the Main menu look for the ePPID entry.
3
The first 8 digits (
CN09N44V)
of the ePPID number represents the system
board model number and the remaining 14 digits represents the code for
the system’s piece part identification code.