Filter
Top Products
Using the printer 13
NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray
before the next one exits the printer. Transparencies and photos may require up to 15 minutes to
dry.
You can load up to: Make sure:
100 sheets of plain paper The paper is designed for use with inkjet printers.
• The envelopes are loaded vertically against the right side of the
paper support.
• The stamp location is in the upper left corner.
• The envelopes are designed for use with inkjet printers.
• You squeeze and slide the paper guide to the left edge of the
envelope (as shown).
NOTE: Do not load envelopes with:
• Holes, perforations, cutouts, or deep embossing.
• Metal clasps, string ties, or metal folding bars.
• Exposed flap adhesive.
10 envelopes
25 sheets of labels The labels are designed for use with inkjet printers.
10 sheets of card stock • The card stock is designed for use with inkjet printers.
• The thickness does not exceed 0.025 inches.
10 greeting cards, index cards,
postcards, or photo cards
The cards are loaded vertically against the right side of the paper
support.
25 sheets of coated, photo, or
glossy paper
The glossy or coated side faces you.
10 transparencies • The transparencies are designed for use with inkjet printers.
• The rough side faces you.
100 sheets of custom size
paper
Your paper size fits within these dimensions:
Width
– 76 to 216 mm
– 3.0 to 8.5 in.
Length
– 127 to 432 mm
– 5.0 to 17.0 in.
25 iron-on transfers • You follow the loading instructions on the iron-on packaging.
• The blank side faces you.
20 sheets of banner paper The banner paper is designed for use with inkjet printers.