Filter
Top Products
Dell
™
Latitude™ E6400 XFR Service Manual
Page 57
28.1 Removing the 1394 Card
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer
.
2. Remove the card cage (see Removing the Card Cage
).
3. Remove the two M2 x 3-mm screws.
4. Lift the 1394 card up at an angle to remove it.
1 1394 cable connection to system board
2
M2 x 3-mm screws (2)
3 1394 card 4
1394 cable
28.2 Replacing the 1394 Card
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Insert the 1394 card at a 45-degree angle to fit the connector into the base assembly. Use the alignment pins
to seat into position.
2. Replace the two M2 x 3 screws.
3. Replace the card cage (see Replacing the Card Cage
).
4. Follow the procedures in After Working on Your Computer
.
29 SIM Card
29.1 Removing the SIM Card Assembly
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer
.
2. Remove the bottom access panel, LCD cable channel covers, display assembly, led cover, palm rest overlay,
keyboard and palm rest (see Removing the Palm Rest
).
4
1
2
3