Filter
Top Products
Dell
™
Latitude™ E6400 XFR Service Manual
Page 64
5. Remove the carry handle from the sockets and slide out of the notebook.
36.2 Replacing the Handle
1. Insert the carry handle pinion into the sockets on the base of the notebook.
1 Handle pinion
2
Tab socket
NOTICE: Image above has palm rest removed to show tab socket close-up. During installation,
verify handle pinions are inserted into the tab sockets properly during reassembly.
2. Replace the four M2.5 x 8-mm bottom retaining screws.
3. Replace the six M2.5 x 8-mm palm rest retaining screws.
4. Follow the procedures in After Working on Your Computer
.
37 Doors
37.1 Removing Media Bay Door
Parts Location
1 Media bay door 2
M3 x 3 mm screws (3)
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the procedures in Before Working on Your Computer
.
2
1
1
2