Back to Removing and Replacing Parts
LED Cover
Dell™Latitude™E6410/E6410ATGServiceManual
Removing the LED Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Gently pry up one end of the LED cover and remove it.
Replacing the LED Cover
To replace the LED cover, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.