Filter
Top Products
Back to Removing and Replacing Parts
Optical Drive
Dell™Latitude™E6410/E6410ATGServiceManual
Removing the Optical Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the ATG Port Cover (applicable on E6410 ATG computer only).
3. Remove the screw that secures the optical drive to the computer.
4. Press and release the optical drive latch.
5. Pull the optical drive out of the computer
Replacing the Optical Drive
To replace the optical drive, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.