Dell I1200 Computer Hardware User Manual


 
Back to Contents Page
Palm Rest
Dell™Inspiron™i1200andi2200ServiceManual
1. Follow the instructions in "Before Working Inside Your Computer."
2. Remove the hard drive.
3. Remove the optical drive.
4. Remove the keyboard.
5. Remove the display assembly.
6. Remove the Mini PCI card.
7. Turn the computer upside down and remove the eight M2.5 x 8-mm screws (labeled "P") from the bottom of the computer. One of the screws is located
in the recess of the hard drive cover.
8. Remove the two M2 x 3-mm screws from the hard drive bay.
9. Turn the computer top-side up and remove the four M2.5 x 5-mm screws (labeled "P") from the top of the palm rest and the remaining two M2.5 x 5-mm
screws from near the power button and the activity LEDs.
CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.