Filter
Top Products
16 | Keyboard
3 Carefully turn the keyboard over and place it on the palm rest.
4 Lift the connector latch and pull the pull-tab to disconnect the keyboard cable
from the connector on the system board.
5 Lift the keyboard away from the computer.
Replacing the Keyboard
Procedure
1 Slide the keyboard cable into the connector on the system board and press down
on the connector latch to secure the cable.
2 Slide the tabs at the bottom of the keyboard into the slots on the palm rest and
place the keyboard on the palm rest.
3 Gently press around the edges of the keyboard to secure the keyboard under the
tabs on the palm rest.
4 Close the display and turn the computer over.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 13.
2 Follow the instructions in "After Working Inside Your Computer" on page 9.
1 keyboard cable 2 connector latch
3tabs (5)
2
1
3
book.book Page 16 Thursday, April 12, 2012 10:14 AM