Filter
Top Products
26 | Optical Drive
3 Carefully pry the optical-drive bezel and remove it from the optical-drive assembly.
4 Remove the screws that secure the optical-drive bracket to the optical drive.
5 Remove the optical-drive bracket.
Replacing the Optical Drive
Procedure
1 Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
2 Replace the screws that secure the optical-drive bracket to the optical drive.
3 Align the tabs on the optical-drive bezel with the slots on the optical-drive
assembly and snap the optical-drive bezel into place.
4 Slide the optical-drive assembly into the optical-drive bay until it is fully seated.
5 Replace the screw that secures the optical-drive assembly to the computer base.
Postrequisites
1 Replace the base cover. See "Replacing the Base Cover" on page 18.
2 Replace the battery. See "Replacing the Battery" on page 13.
3 Follow the instructions in "After Working Inside Your Computer" on page 9.
1 optical-drive bezel 2 optical drive
3 optical-drive bracket 4 screws (2)
1
2
4
3
book.book Page 26 Thursday, April 12, 2012 10:14 AM