Filter
Top Products
48 | Camera Module
Replacing the Camera Module
Procedure
1 Use the alignment posts on the display cover to place the camera module
in position.
Ensure that the camera module is secured under the tab on the display cover.
2 Connect the camera cable to the connector on the camera module.
3 Replace the screw that secures the camera module to the display cover.
4 Turn the display panel over and place it on the display cover.
5 Align the screw holes on the display panel with the screw holes on the
display cover.
6 Replace the screws that secure the display panel to the display cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 38.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 37.
3 Replace the palm rest. See "Replacing the Palm Rest" on page 31.
4 Replace the base cover. See "Replacing the Base Cover" on page 18.
5 Replace the keyboard. See "Replacing the Keyboard" on page 16.
6 Replace the battery. See "Replacing the Battery" on page 13.
7 Follow the instructions in "After Working Inside Your Computer" on page 9.
book.book Page 48 Thursday, April 12, 2012 10:14 AM