Filter
Top Products
Removing and Replacing Parts 4-31
4. Remove heat sink screws S3 and S4.
Lift off the heat sink.
5. Disconnect the keyboard cable from the main board.
Use a small flat-blade screwdriver to release the ZIF connector securing the
keyboard cable.
6. Remove the keyboard from the computer.
CAUTION: Lift away the heat sink gently. Rough handling could
damage the thermal pad on the bottom of the heat sink.
CAUTION: Lift away the cable only after the ZIF connector is
opened (see “ZIF Connectors” found earlier in this chapter). Pulling
the cable from the connector damages the conductive coating on the
end of the cable.