Filter
Top Products
Replacing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the stand assembly into the slots on the back cover.
2 Lower the stand assembly to lock it into place.
If you have removed the stand base from the stand riser, follow the steps
below:
3 Align the captive thumbscrew on the stand base with the screw hole on
the stand riser and tighten it.
4 Fold the screw handle on the stand base.
20